Folding and Binding

What is the Japanese binding method?

The Japanese binding method is stab binding: holes punched near the spine edge and sewn with thread. Learn how it works, patterns, limits and zine uses.

On this page
  1. The short answer
  2. How it works
  3. Common stitch patterns
  4. Why zine makers use it
  5. Limitations
  6. How to make a basic four-hole binding
  7. Related methods

The short answer

The Japanese binding method, usually called Japanese stab binding, is a way of binding a stack of pages by punching holes along one edge (near the spine) and sewing through them with thread. The thread is visible on the outside of the book, and the stitching can be plain or decorative. It uses no glue. It belongs to a family of stab-binding traditions from East Asia, and variants are found in Chinese and Korean bookmaking as well.

How it works

Unlike a staple or pamphlet stitch, which passes through the center fold, stab binding goes through the flat margin of the whole stack. The pages (often folded sheets, as in a French fold zine, or loose single sheets) and the covers are stacked, aligned, and held with clips. Holes are punched a short distance in from the spine edge, and thread is sewn through them and wrapped around the spine edge to lock the pages.

Traditional Japanese books often use sheets folded so the fold sits at the outer edge, with the printed or drawn side outward. That is why the French fold and Japanese binding go together so naturally.

Common stitch patterns

Japanese stab binding has several named patterns. The best known are:

  • Four-hole binding (yotsume toji): The basic and most common pattern, with four holes in a line.
  • Noble binding: A variant with additional holes, and extra stitches at the corners.
  • Hemp leaf binding (asa-no-ha toji): A decorative pattern that forms a repeating hemp-leaf design.
  • Tortoise-shell binding (kikko toji): A pattern of hexagon-like shapes, often used for thicker books.

For a zine, four-hole binding is the best place to start, and the others are worth trying once you are comfortable.

Why zine makers use it

  • It handles loose single sheets and mixed paper, including paper that does not fold cleanly.
  • It copes with thicker stacks than a center-fold staple or thread stitch.
  • It needs no glue or special equipment, only an awl or hole punch, a needle and thread.
  • The visible stitching adds a decorative element.

Limitations

  • Pages do not open fully flat, because they are held at the spine edge. A reader may have to open the zine wide to see text near the binding. Leave a generous margin on the spine side.
  • Pages are fixed at the edge, so an illustration across a double-page spread will be lost near the gutter.
  • It is slower than stapling if you are producing many copies.

How to make a basic four-hole binding

  1. Prepare the pages and covers, and align them.
  2. Clamp the stack with binder clips on the spine side.
  3. Mark four holes in a line, parallel to the spine and a short distance in from the edge (somewhere around 1 to 1.5 cm is common). Space them evenly, with the end holes a little in from the head and tail.
  4. Punch each hole through the entire stack with an awl, hole punch or drill. Place a scrap board under the stack.
  5. Thread a needle with a length of thread about four times the height of the spine.
  6. Sew through the holes, wrapping the thread around the spine edge as you go. A basic route sews through each hole in turn, wraps the head and tail edges so those corners are held, then runs back along the spine. Diagrams for four-hole binding are widely available, and following one is easier than relying on text.
  7. Tie off with a knot hidden between the pages, and trim.

Practice on scrap paper first, as getting the thread path right is the hardest part.

If you want a binding that opens flatter, look at the Coptic stitch. For a broader comparison of options, see how to bind a zine.

The complete guide to folding and binding

How to Bind a Zine: Every Binding Method Compared
Read the guide

Keep exploring

Guides from other topics

All topics →