Folding and Binding

How to Make a French Fold Zine

Learn how to make a French fold zine: print on one side, fold each sheet at the outer edge, and bind with a stab stitch for double-thick pages.

On this page
  1. What a French fold zine is
  2. Why choose a French fold
  3. Materials
  4. Plan the layout
  5. Make it step by step
  6. Binding options
  7. Common problems
  8. When to pick something else

What a French fold zine is

In a French fold zine, each sheet is printed on one side only and folded in half with the printed side facing out. The fold ends up at the outer (fore) edge of the zine, and the two loose edges of each sheet sit together at the spine side. The inside of each folded sheet is blank. The zine is then bound along the spine edge, usually with a stab stitch, because there is no center fold to staple or sew through.

The name is used in a few ways. Some people use “French fold” for other folding layouts, such as the greeting-card style fold of a sheet folded in half and then in half again. This article covers the bookbinding sense described above.

Why choose a French fold

  • One-sided printing. If your printer or copier only prints on one side reliably, you still get a book with printed pages on the front and back of each leaf.
  • Thin or translucent paper. The folded sheet doubles the paper thickness, so text does not show through as much.
  • Clean outer edges. The fold is a smooth edge rather than a stack of cut edges.
  • A distinctive look. The blank insides can be left empty, or used for hidden notes, small drawings or pockets.

The trade-offs are more paper and more weight per page, and the stab binding at the spine does not allow the zine to open flat.

Materials

  • Paper for the inside pages, printed on one side
  • A heavier cover sheet, folded or flat
  • A bone folder
  • An awl or pin, and a punch or drill if you want larger holes
  • Needle and thread (waxed thread, embroidery floss or similar)
  • Binder clips to hold the stack

Plan the layout

Each folded sheet makes two printed pages: one on the front, one on the back. A sheet folded this way gives two pages, not four as in a normal half-fold zine. Count pages as multiples of two, not four.

Leave a wider margin on the spine side than you normally would, because the stitching passes through that margin and the pages will not open completely flat. Check your margin on a mock-up.

Print one-sided pages in reading order, with the two pages that share a sheet side by side. When folded, the printed face of the left page and the printed face of the right page both stay on the outside.

Make it step by step

  1. Print each sheet on one side only.
  2. Fold each sheet in half with the printed side out, so the fold sits at the outer edge. Crease with a bone folder.
  3. Stack the folded sheets in order, with the folds on the same side. Adding a cover is optional.
  4. Align the stack at the spine edge and secure it with binder clips.
  5. Mark holes in the margin along the spine edge. Four evenly spaced holes is a common starting point, and the first and last should be a little in from the corners.
  6. Punch the holes with an awl or drill, through all layers.
  7. Sew through the holes, wrapping the thread around the spine edge. See what the Japanese binding method is for the stitch pattern most often used.
  8. Tie off the thread and trim the ends.

Binding options

Stab binding (Japanese stitch) is the usual choice. Some makers also use a few staples through the spine margin, which is quick but less refined, or binder screws and posts if they want the pages to be replaceable.

For other methods, see the comparison in how to bind a zine.

Common problems

  • Pages that do not open easily. The margin is too narrow, or the stitching is too tight. Widen the margin next time.
  • Uneven edges at the spine. Folded sheets can shift as you punch. Clip the stack firmly and jog it against a flat surface first.
  • Show-through on the outside. Because the printed side faces out, check that the paper is not too thin for heavy ink.
  • Wrong page order. Mock up a blank folded sheet and number the pages before printing.

When to pick something else

If you can print double-sided and your zine is short, a regular folded and stapled zine is quicker. The page-folding basics are in how to fold a zine.

The complete guide to folding and binding

How to Bind a Zine: Every Binding Method Compared
Read the guide

Keep exploring

Guides from other topics

All topics →