The short answer
Most magazines are bound in one of two ways: saddle stitching (folded sheets stapled through the spine fold) for thinner issues, or perfect binding (pages glued into a wrap-around cover with a flat spine) for thicker ones. Less common options include Wire-O or spiral binding for special-interest or workbook-style titles, and case binding (hardcover) for collector’s editions.
Saddle stitching
Printed sheets are folded in half, nested inside one another, and stapled through the center fold with wire staples. It is inexpensive and quick to produce, and the magazine opens close to flat.
- Best for: Thinner magazines, catalogs and booklets. Sources commonly cite a limit somewhere between 64 and 96 pages, though the real limit depends on paper thickness, so check with your printer.
- Drawback: There is no flat spine, so the title cannot be printed on it. Thicker stacks bulge at the fold.
- Page counts are multiples of four.
This is the same structure as a stapled zine. See stapled and pamphlet-stitched zines.
Perfect binding
The inner pages are gathered into a stack, the spine edge is trimmed or roughened, and a strong adhesive attaches them to a cover that wraps around the spine. Printers commonly use hot-melt EVA or the more flexible PUR adhesive. The three open edges are then trimmed.
- Best for: Thicker magazines, often 64 pages or more by common guidance.
- Advantage: A square spine on which the title and issue date can be printed, so it looks good on a shelf.
- Drawback: It does not open as flat as saddle stitching, and cheaper glue can crack with age.
For a home version, see how to perfect bind a zine at home.
Less common magazine bindings
- Wire-O or spiral binding: For workbooks, reference guides and magazines meant to fold completely back on themselves.
- Case binding (hardcover): For special collector’s or keepsake issues. It is more expensive and slower to produce.
- Sewn bindings: Some higher-end magazines sew their signatures before gluing or covering, which makes the spine stronger.
How printers decide
The choice usually comes down to page count, budget, paper weight and the look wanted. Printers often recommend saddle stitching for thinner products and perfect binding once the stack is thick enough to hold a spine, but exact page counts vary, so ask for a sample or a printed dummy.
What this means for zine makers
If you are producing a magazine-style zine, the same rules of thumb apply.
- A short zine with a folded structure can be stapled or sewn along the fold.
- A thicker zine that needs a spine can be perfect bound, or sewn and glued.
- If you want to fold pages flat or work with unusual paper, consider stab binding or coil binding.
For a full comparison of options, see how to bind a zine.