Zine Formats

How to Make a Mini Comic Zine: Layout, Panels and Page Order

Plan a mini comic zine: choose a format, thumbnail your story, set panel grids and lettering for small pages, and get the page order right before you print.

On this page
  1. What a mini comic zine is
  2. Choose a format and page count
  3. Plan the story
  4. Page order for the one-sheet format
  5. Panels and gutters at small size
  6. Lettering and text size
  7. Drawing, inking and scanning
  8. Assemble and copy
  9. Longer comics
  10. Common mistakes

What a mini comic zine is

A mini comic is a small, self-published comic. Many are folded from a single sheet or stapled from a few sheets of paper, and they are one of the most common kinds of zine. The format suits short stories, diary comics, gag strips and sketchbook-style work. Because the pages are small, the main skill is deciding what to put in each panel and keeping text readable.

Choose a format and page count

Your format decides how many pages you have to tell the story.

If this is your first comic, the one-sheet format keeps the project finishable.

Plan the story

Start small and rough.

  1. Write the idea in one sentence. For example, “A cat tries to get into a closed room.”
  2. Count your pages. In an eight-page zine, six are for the story. Decide whether the cover or back cover will carry part of it, such as a title page or a final joke.
  3. Divide the story into beats. A beat is a single moment: the setup, a change, a reaction. Aim for one to three beats per page for a mini comic.
  4. Thumbnail. On scrap paper, draw tiny boxes for each page and sketch rough panels. Thumbnails are for you, so don’t polish them.
  5. Plan the page turns. In a folded zine, two pages are seen together as a spread. Use the turn of the page for a surprise or a reveal where possible.

Page order for the one-sheet format

The one-sheet fold has a catch: four of the eight panels are upside down when the sheet is laid flat. A common layout with the sheet in landscape is:

Column 1 Column 2 Column 3 Column 4
Top row (upside down) 5 4 3 2
Bottom row (upright) 6 7 8 1

Page 1 is the front cover and page 8 is the back cover. Templates differ, so don’t rely only on this table. Fold a spare sheet, number the panels, and check which are upside down. Then draw your pages on that map. If you draw each page separately and plan to scan, you can rotate the digital pages in your software before printing.

Panels and gutters at small size

On letter paper, a mini zine page is about 2.75 × 4.25 inches (about 74 × 105 mm on A4), and you also need room for margins. A few guidelines:

  • Keep layouts simple. Two to four panels per page is plenty. Many mini comics use just one or two.
  • Leave margins. Keep important art and text away from the edges and folds, because trimming, copying and folding can all shift content.
  • Use consistent gutters. The gap between panels should be large enough to stay clear after copying. A narrow, uniform gap looks tidy.
  • Vary shot sizes. A close-up, a wide shot, and a reaction panel help pacing.
  • Think about reading flow. Left to right and top to bottom is the usual order in English-language comics. Tell the reader where to look next.

If you plan to let art bleed off the edge of a page, remember that a one-sheet zine is folded, not trimmed, so bleed isn’t practical. Use clean margins instead.

Lettering and text size

  • Hand-lettering should be bold and clear. Thin pencil lines photocopy poorly.
  • If you use a font, print a test page and check that you can read it at its final size. Tiny text is the most common problem in small comics.
  • Keep balloons short. If a panel has more than a couple of short lines, consider splitting it.
  • Write dialogue as speech, and cut anything the art already shows.

Drawing, inking and scanning

  1. Pencil lightly on paper cut to the page size, or draw at a larger size and reduce later.
  2. Ink with dark pens or markers. Black ink on white paper reproduces best on a photocopier.
  3. Erase pencil once the ink is dry.
  4. Scan or photograph at a good resolution, then arrange the pages in a layout program or on a template.
  5. Check contrast. Increase it slightly if lines look gray.

If your art is in color or gray tones, test how it looks after printing, because home printers and copiers can shift tones.

Assemble and copy

Print or copy single-sided onto one sheet, then fold and cut. Make a test copy first and read the comic through. If the order is wrong, adjust and test again before printing more. If you use a copy shop, bring your test copy so staff can see what you need.

Longer comics

If your story is longer than six pages, use a half-letter or A5 booklet and plan in multiples of four. Design pages in order and use your printing software to arrange them for double-sided booklet printing. Larger pages also make lettering easier.

Common mistakes

  • Putting too much on a page
  • Forgetting that some panels end up upside down
  • Drawing too close to the folds
  • Lettering that is too small or too light
  • Not testing the fold before copying

Finish one short mini comic, then adjust the format and length for the next one. For other formats, see types of zine formats.

The complete guide to zine formats

Types of Zine Formats: A Complete Guide
Read the guide

Keep exploring

Guides from other topics

All topics →