Printing

How can I convert a PDF to a zine?

Turn a PDF into a foldable zine by fixing the page count, arranging pages in booklet order and printing double-sided. Includes options for every tool level.

On this page
  1. The Short Answer
  2. Step 1: Check Page Count and Size
  3. Method 1: Booklet Printing From Your PDF Viewer or Printer Driver
  4. Method 2: Layout Software
  5. Method 3: Imposition Tools
  6. Method 4: A Single-Sheet, Eight-Page Zine
  7. Duplex and Flip Settings
  8. If You’re Sending the PDF to a Print Shop
  9. Troubleshooting

The Short Answer

To turn a PDF into a zine, make sure the page count suits a folded booklet, then rearrange the pages into “booklet order” so that when the printed sheets are folded together the pages read in sequence. Most people do this with a booklet option in a print dialog or layout program, or with a small imposition tool. Then you print double-sided, fold and staple. If you’re sending the file to a print shop instead, you usually don’t rearrange anything and send the pages in normal reading order.

Step 1: Check Page Count and Size

Folded booklets are built from sheets of paper, and each sheet holds four pages. A page count that is a multiple of four (8, 12, 16, 20 and so on) fits without leftovers. If your PDF has, say, 14 pages, you’ll need to add two blank or filler pages, such as an inside cover note, a contents page or a “thanks for reading” page.

Next, think about page size. A zine made from letter paper folded in half has pages of 5.5 x 8.5 inches, and one made from A4 has A5 pages. If your PDF is a standard letter or A4 document, scaling it down to half size will shrink the text, so check that it’s still readable. Small body text can become hard to read, so consider enlarging the type if you’re able to edit the source file.

Leave generous margins, especially on the spine side, as printers can’t print to the edge and the fold hides some of the page.

Method 1: Booklet Printing From Your PDF Viewer or Printer Driver

Many PDF programs and printer drivers offer a booklet mode that reorders and shrinks the pages for you. For example, Adobe Acrobat has a booklet option in its print dialog under page sizing and handling. Other programs have similar settings, but names and availability vary, and some built-in viewers don’t offer one at all.

General approach:

  1. Open the PDF and choose Print.
  2. Find the booklet or “booklet printing” option.
  3. Choose the paper size (the full sheet, such as letter or A4), and make sure the output is double-sided.
  4. Print a test of a small file first and fold it to check the page order.

Method 2: Layout Software

If you can edit the source, a layout program makes this easier. Some, such as Adobe InDesign, have a booklet printing feature that arranges pages into printer spreads. Canva and similar design tools can produce a PDF at your final page size, but you’ll still need to rearrange pages for home printing, using one of the methods here. Check the tool’s current features, as they change.

Setting the document up at the final zine size from the start avoids scaling problems later.

Method 3: Imposition Tools

“Imposition” is the term for arranging pages on a sheet so they come out in the right order when folded. Free and low-cost tools exist for this, including command-line tools such as pdfjam and desktop or web apps built for booklets. Features, safety and availability differ, so use a source you trust, and do not upload private files to a website you don’t know. Read the tool’s documentation, because options differ between versions.

Whatever tool you use, the process is similar: load the PDF, pick booklet or saddle-stitch layout, set the paper size and output a new PDF. Then print that new PDF double-sided.

Method 4: A Single-Sheet, Eight-Page Zine

If your content is short, you can use the one-sheet zine fold, where a single sheet of paper is folded and cut to make eight pages. This needs a special layout in which some pages are upside down, so you need a template. Place your eight pages into the template, print on one sheet, then fold and cut following the template’s instructions. Our guide to printing a zine shows how the fold works.

You can’t produce this layout from a normal sequential PDF by simply printing it, so use a template or an imposition tool that supports it.

Duplex and Flip Settings

For booklet sheets in landscape orientation, the usual duplex setting is flip on the short edge. If the back of each sheet is upside down relative to the front, switch to the other flip setting and test again. If your printer can’t print double-sided automatically, print the odd-numbered sides first, then reload the pages as your printer’s manual describes, which takes some trial and error. Test with scrap paper.

If You’re Sending the PDF to a Print Shop

Don’t impose your pages yourself unless the shop asks for it. Many printers want single pages, in order, with the front cover first and the back cover last, and they handle the arrangement for their machines. Look at the shop’s file instructions and follow them. Some ask for specific formats or bleed. Our guide on printing at a copy shop lists questions to ask, and risograph studios have their own rules.

Troubleshooting

  • Pages are in the wrong order after folding. Re-check that the page count is a multiple of four and that you used booklet mode, not a plain “2 pages per sheet” setting.
  • Text is too small. Enlarge the font size in the source or reduce the page margins in the source file.
  • Text is cut off. Increase the margins, and avoid “fit to page” distortions.
  • Backs are upside down. Change the flip setting.
  • The zine is bulky. Use lighter paper or cut pages. See choosing the best paper for your zine.

The complete guide to printing

How to Print a Zine at Home or at a Print Shop
Read the guide

Keep exploring

Guides from other topics

All topics →