What a fold-out poster zine is
A fold-out poster zine is a one-sheet booklet with a poster on its back. You fold the sheet into a small eight-page zine to read it, and unfold it completely to reveal one large image. The poster is the “bonus” side, and the folds in it are part of the look.
It is a nice format for small art releases, event zines, gig posters, gifts, and zines where the cover image deserves more room.
If you haven’t folded a one-sheet zine before, start with how to make a mini zine. The poster version uses the same fold.
Choose a sheet size
A bigger sheet gives you a bigger poster and bigger pages.
| Sheet | Poster size | Approximate page size |
|---|---|---|
| US Letter (8.5 × 11 in) | 8.5 × 11 in | 2.75 × 4.25 in |
| A4 | 210 × 297 mm | about 74 × 105 mm |
| Tabloid (11 × 17 in) | 11 × 17 in | 4.25 × 5.5 in |
| A3 | 297 × 420 mm | about 105 × 148 mm |
Letter or A4 can be printed on most home printers. Tabloid or A3 usually needs a copy shop or print service, but the pages are a more comfortable size for text. See zine sizes explained for more.
Plan both sides
Think of the sheet as having two faces:
- Zine side: eight panels in a grid, four across and two down. Some are upside down on the flat sheet. See the page-order table in how to make a mini comic zine.
- Poster side: one large image or layout, the full size of the sheet.
Mock this up first with a blank sheet. Fold it into the zine, then unfold it and mark the folds. Draw a rough outline of where the panels fall on each side, with the poster on the back.
The slit and your poster art
To collapse a one-sheet zine, you make one cut along the center crease, across the middle two panels. That cut goes through the sheet, so it appears on the poster side too, as a straight slit across the middle of the poster.
Options:
- Design around it. Keep key faces, text or focal points out of the middle band of the poster, where the slit falls.
- Use it. Put a horizon line, a river, or a division in the picture there so the cut looks deliberate.
- Accept it. Many poster zines simply have a slit in the middle, and readers expect it.
Folds also leave creases on the poster. A busy or textured image hides them better than a smooth gradient or a large blank area.
Orientation and double-sided printing
This is the step where most people get stuck. The panels on the zine side are laid out in a grid, some upside down. The poster side needs to be upright when the sheet is unfolded in a particular orientation.
- Decide which way up the poster should be when the reader opens the zine, and which edge is the top.
- Place the zine panels so that the cover is where you want it relative to that poster orientation. Mark it on your mock-up.
- Print a single test copy using your printer’s double-sided setting, or print one side, flip the sheet, and print the other.
- Check that the poster is upright and not rotated or mirrored, and that panels line up as expected.
- If something is off, flip or rotate one side of the file and test again.
Printers differ in how they flip pages for double-sided printing (long edge versus short edge), so test with real paper instead of trusting the preview. If you use a copy shop, take your test copy and show them which way up the pages should be.
If your printer can’t print double-sided, print one side, then feed the sheet back in. Mark the paper with a pencil arrow so you remember which way it goes.
Step by step
- Design the poster side at the sheet size, and the eight panels on the other side at the right size.
- Print a test copy on plain paper.
- Fold the sheet in half the long way, then in half twice the other way, and unfold. You’ll see eight panels on the zine side.
- Fold in half the long way and cut along the center crease, from the fold to the center of the sheet, across the middle two panels only.
- Unfold and refold in half the short way, with the slit along the fold. Push the ends toward each other so the slit opens into a diamond.
- Collapse into a booklet, with the cover on the front.
- Press the creases flat, then unfold the whole sheet to check the poster.
- Make adjustments and print the rest.
For the details of the fold, see how to make a mini zine and how to fold a zine.
Design tips
- Use clear, bold shapes on the poster so that folds don’t break the image apart.
- Keep text small and meaningful, or split it across panels so no line crosses a fold.
- Leave a margin around the poster edge, because printers often can’t print right to the edge of a sheet.
- Use a heavier paper only if it still folds and cuts cleanly. Thin paper is easier to collapse.
- Put a small note on the cover or the last page telling readers to unfold the zine to see the poster, because many won’t try.
Alternative: a fold-out insert in a stapled zine
If you want a larger poster than a one-sheet zine allows, you can make a folded insert. Print a poster on a larger sheet, fold it down to the size of your pages, and tuck it in the middle of a stapled booklet or tape it to a page. The poster folds down to the zine’s page size, and the reader unfolds it when they reach it. This works with half-letter or A5 booklets. See types of zine formats for other ways to combine formats.
Troubleshooting
- The poster is upside down. Rotate that side of the file 180 degrees, or flip the page in the printer settings, and test again.
- The slit cuts through important art. Move the art or redesign the middle band.
- The panels won’t collapse. Check that the slit only spans the middle two panels, and that creases were made in the right direction.
- The sheet is too thick. Try lighter paper, or score the folds before creasing.